data sheets / specifications
| PDFS
| AUTOCAD .DWG
|
Data Sheet 1: End Elevation
Typical door in bulkhead detail. |
 |
 |
Data Sheet 2: Rear Elevation
Typical door opening viewed from inside. |
|
|
Data Sheet 2A: End Elevation
2 doors in a single opening with a removable mullion.
Mullion can be positioned off centre if required. |
|
|
Data Sheet 2B: Typical Elevation
Of single roller shutter door with removable side guides. |
|
|
Data Sheet 2C: Rear Elevation
Typical door opening viewed from inside. |
|
|
Data Sheet 3: Typical Bulkhead Detail
Two doors in a single opening with removable centre mullion. |
|
|
Data Sheet 3B: Typical Bulkhead Detail
Single door opening. Spring balanced manual operation. |
|
|
Data Sheet 3C: Typical Bulkhead Detail
Two doors with a removable centre mullion. Two different counter heights. |
|
|
Data Sheet 4: Plan View
Showing two doors in a single opening with a removable standard mullion. Mullion can be positioned off centre if required. |
|
|
Data Sheet 4A: Plan View
Single door in typical opening manual spring balanced. |
|
|
Data Sheet 4B: Internal Corner
Plan view - showing two doors with a removable corner mullion. |
|
|
Data Sheet 4C: Internal Angle
Plan view - showing two doors mounted on angled bulkhead. |
|
|
Data Sheet 4D: External Angle
Plan view - showing two doors with a removable angle mullion. |
|
|
Data Sheet 4E: Plan View
Showing two doors with special wide removable mullion. |
|
|
Data Sheet 4F: Plan View
Doors mounted at same height level, to internal angled bulkhead. |
|
|
Data Sheet 4G: Plan View
Internal angled bulkhead. |
|
|
Data Sheet 4H: Three Doors
Three doors side by side in a common opening. |
|
|
Data Sheet 4I: Plan View
Three doors mounted to external angled bulkhead face. |
|
|
Data Sheet 4J: External Corner
Plan view - showing two doors mounted to bulkhead face. |
|
|
Data Sheet 4K: Plan View
Doors at same height level - Adjacent door reverse rolled. |
|
|
Data Sheet 5: HC1
Elevations showing heavy duty motorising clearances. |
|
|
Data Sheet 6: SD1
Elevations showing standard motorising clearances - single phase only. |
|
|
